Analisis Risiko K3 Bongkar Muat dengan Metode HIRARC

Muhammad Firdaus; Dwi Nurul Izzhati

doi:10.33506/mt.v12i2.5595

Authors

Muhammad Firdaus Universitas Dian Nuswantoro
Dwi Nurul Izzhati Universitas Dian Nuswantoro

DOI:

https://doi.org/10.33506/mt.v12i2.5595

Keywords:

Hazard Identification, HIRARC, K3, Loading and Unloading, Risk Assessment

Abstract

Occupational health and safety (OHS) in port loading and unloading activities remains a critical issue, particularly regarding the high potential for accidents arising from interactions between workers, operational vehicles, and heavy equipment. Operations involving forklifts, transport vehicles, and manual cargo handling frequently entail risks such as collisions, being struck by falling loads, physical injuries, and equipment damage. These conditions indicate that OHS risk management in loading and unloading processes is suboptimal and requires a systematic approach to identify and control existing hazards. This study aims to assess OHS risks associated with cargo loading and unloading using the HIRARC approach. The results indicate that the primary sources of hazard—capable of causing workplace accidents—stem from the use of operational vehicles and heavy equipment (such as forklifts) and from manual cargo handling activities. Loading and unloading activities were categorized into low risk (15%), medium risk (55%), and high risk (30%), with the use of forklifts and operational vehicles falling into the high-risk category. Risk control was addressed by applying the hierarchy of controls, encompassing elimination, substitution, engineering controls, administrative controls, and the use of personal protective equipment (PPE). Consequently, there is a need for enhanced supervision of vehicle activity, regulation of operational routes and speeds, installation of safety signage, and improved worker understanding regarding PPE usage and safety procedures. Furthermore, the consistent implementation of a workplace safety culture is a crucial factor in supporting the long-term effectiveness of risk control measures.

References

Alfatiyah, R., Surya Kencana No, J., & Selatan, T. (2017a). Analisis Manajemen Risiko Keselamatan Dan Kesehatan Kerja Dengan Menggunakan Metode Hirarc Pada Pekerjaan Seksi Casting. Jurnal Mesin Teknologi (SINTEK Jurnal, 11(2).

Anas, R. A. (2022). Pengaruh Kompensasi, Lingkungan Kerja, Keselamatan Dan Kesehatan Kerja (K3) Terhadap Kepuasan Kerja Karyawan Pt Syam Surya Mandiri Surabaya. Soetomo Management Review, 1(1), 23–31

Darmawan, I., & Basuki, M. (2022). Analisis Risiko Keselamatan Dan Kesehatan Kerja Pada Operasional Dan Bongkar Muat di Dermaga Pelayaran Rakyat Gresik Menggunakan Metode Matrik dan FMEA.

Dwi, E., Kantor, S. B., & Sidoarjo, C. (2016). IJOSH CC BY NC-SA.

Farida, E., Andarini, S., Halim Natsir, M., kunci, K., dan Kesehatan Kerja, K. K., & Risiko, M. (2024). Analisis Faktor Kunci dan Tantangan dalam Pemenuhan Standar Keselamatan dan Kesehatan Kerja (K3) untuk Mencapai Infrastruktur yang Berkualitas: Sebuah Literatur Review. 2(3), 83–99. https://doi.org/10.61132/konstruksi.v2i3.362

Fariya, S. (2017). Penilaian Risiko Keselamatan Kerja Pada Industri Ship Recycling Di Indonesia. 07(2).

Firdaus, M., & Nurul Izzhati, D. (n.d.). Metode Jurnal Teknik Industri Vol. XX (X): xx-xx Tahun Analisis Risiko K3 Bongkar Muat dengan Metode HIRARC Occupational K3 Risk Analysis in Loading and Unloading Using HIRARC. Jl Nakula I, (1).

Luhur, B. A., Prodi Teknik Industri, P., & Timur, J. (2020). Evaluasi Keselamatan Kerja Dengan Menggunakan Metode Hazards Identification, Risk Assessment And Risk Control(Hirarc). Retrieved http://www.manajemenn.web.id/2011/04/manajemen-resiko.html

Maula Imro’atul Khasanah, E., & Dyah Nawawinetu, E. (2018). Journal of Vocational Health Studies www.e-journal.unair.ac.id/index.php/JVHS Journal of Vocational Health Studies. 01, 20–27. https://doi.org/10.20473/jvhs.V2I1.2018.20-27

Mauliyani, H., Romdhona, N., Fauziah, M., Studi Kesehatan Masyarakat, P., & Kesehatan Masyarakat, F. (2022). Environmental Occupational Health And Safety Journal Identifikasi Risiko Keselamatan Kerja Metode (Hirarc) Pada Tahap Pembuatan Tangki Di Pt. Gemala Saranaupaya 1. Environmental Occupational Health and Safety Journal •, 2(2), 163.

Muhammad, I., Susilowati, I. H., Keselamatan, M., Kerja, K., & Keselamatan, D. (2021). Analisa Manajemen Risiko K3 Dalam Industri Manufaktur Di Indonesia: Literature Review. 5(1).

Rahmatullah Hanif, Y., Basuki, M., Teknik Perkapalan, J., & Teknologi Adhi Tama Surabaya, I. (2022). Penilaian Risiko K3 pada Proses Pembangunan Kapal Bantu Rumah Sakit (BRS) menggunakan Metode Failure Mode and Effect Analysis (FMEA) dan Matrik Risiko. In J. SEMITAN (Vol. 1, Number 1). https://ejurnal.itats.ac.id/semitan

Ramadhan, F., Kunci, K., Apd, :, Kesehatan, K., & Kerja, R. (2017). Seminar Nasional Riset Terapan

Ria, R., Zendrato, P., & Sunardi, D. (2020). Penerapan Prinsif Kesehatan Dan Keselamatan Kerja Di Ukm Pande Besi Tradisional.

Sains Dan Teknologi Kelautan, R., Nasser, A., & Marselinus Aril Patunggu, dan. (2022). Analisa Dampak Kinerja Pt. Pelindo Pasca Di-Merger. In Sensistek (Vol. 5, Number 2).

Septian Purnama, D. (2015). Analisia Penerapan Metode Hirarc (Hazard Identification Risk Assessment And Risk Control) Dan Hazops (Hazard And Operability Study) Dalam Kegiatan Identifikasi Potensi Bahaya Dan Resiko Pada Proses Unloading Unit Di Pt. Toyota Astra Motor: IX.

Sugiantara, K., & Basuki, M. (2019). Identifikasi dan Mitigasi Risiko di Offshore Operation Facilities dengan Menggunakan Metode Failure Mode and Effect Analysis. Jurnal INTECH Teknik Industri Universitas Serang Raya, 5(2), 87–92. https://doi.org/10.30656/intech.v5i2.1775

Sumberdaya, J., Berkelanjutan, B., Saputro, M. B., Basuki, M., Perkapalan, J. T., Adhi, T., Surabaya, T., Arief, J., Hakim, R., & 100 Surabaya, N. (2022). Risk Assessment K3 Pada Divisi Kapal Niaga Pt. Pal Indonesia Menggunakan Metode Fmea (Failure Mode And Effect Analysis ). In J. SEMITAN (Vol. 1, Number 1). https://ejurnal.itats.ac.id/semitan

Suroso, H. C., & Yanuar, K. E. (n.d.). Analisa Potensi Bahaya pada Perusahaan Fabrikasi Baja menggunakan Metode HAZOP (Hazard and Operability Study). In Journal of Advance Information and Industrial Technology (JAIIT) (Vol. 2, Number 1).

Timothy, M., & Widiawan, K. (2022). Hazard Identification, Risk Assessment and Risk Control (HIRARC) pada CV Lisa Jaya Mandiri Food. In Jurnal Titra (Vol. 10, Number 2).

Triswandana, I. W. G. E., & Armaeni, N. K. (2020). Penilaian Risiko K3 Konstruksi Dengan Metode Hirarc. 4(1), 2581–2157. https://doi.org/10.30737/ukarst.v3i2